PROFIBUS DP Connectors

EasyConn PB – Profibus DP Connectors with Diagnostic LEDs

The best-in-class PROFIBUS DP Connector EasyConn PB provides all test functions speeding up implementation and trouble shooting. Four LEDs, which are visible from both sides, indicate bus- and device-status:

The yellow LED shows the voltage supply of the device (PWR), the green LED the bus-activity (TxD); another yellow LED informs whether the termination is switched OFF or ON (Term). The red LED indicates whether there is a wrong termination resistance or a false surge impedance that influences the bus transfer (ERR). The integrated EasyConn Controller works with a baudrate of up to 12 Mbaud. Even at this rate the power consumption is very low, so that the PROFIBUS-participants are strained at the minimum. The connector with 45°/90° cable outlet provides easy access to the integrated PU/diagnosis socket; no additional hub is required.

The full metal case ensures high noise immunity. The switchable termination resistances which are accessable from both sides are activated by the plug with slide switches. In this way, testing of the profibus communication can be executed without removing plugs or cable, the cable ducts are equipped with transparent cover so the correct correlation of the bus cords is visible. Also under field conditions, easy connection of stiff or flexible bus cable is supported by integrated cutting-clamps. All parts of the plug are designed as screw-saving.

Ordering information

  • EasyConn PB 90°: PA003135
  • EasyConn PB 45°: PA003121
  • EasyConn PB 0°: PA003122
  • Bus line (25m to 1000m) PA00315x

Downloads: EasyConn-Profibus DP Connetcor Brochure

Please Contact Us if you have requirements.